RK Invent Weld Automation Private Limited

This is special product to fabricate Pre Engineered Building Beams. This machine can handle all PEB H Beam Welding Machine weld the beams in Horizontal position, dual torch simultaneous welding. This machine is built with minimum beam width of 150mm to maximum of 2100mm and thickness from 4 mm to 25mm range.
Specification:
DescriptionBeam Models:BWL 1000BWL 1250BWL 1500BWL 1800BWL 2100Beam Width - Max1000mm1250mm1500mm1800mm2100mmWeb Thickness - Max10mm12mm12mm16mm16mmFlange Height - Max400mm400mm450mm500mm500mmFlange Thickness - Max12mm16mm16mm25mm25mmBeam Width Overall1000mm1250mm1500mm1800mm2100mmCurved Beams20 meters in Radius and above ( Provided extra wide conveyors are installed)

Pre-engineered buildings predominantly have combination of parallel and tapered configuration of

I-shaped structure. As these, I - shaped structures are non-standard as rolled sections, hence fabricated by

welding of two flanges and a web together. Assembled in site by way of bolted connections, thus the entire

frames of pre-engineered buildings are produced.

Automatic and Semi-automatic Beam welding modules are used to produce PEB beam structures on high

volume with repetitive quality. Beam line consist of Flange Splice Welder, Assembly + Tack Welder,

Pull Through Welder (PTW) and all these three welding stations are connected by way of conveyors to move

loose plates as flanges and web from one station to another without the need for a crane and welded beams

Additional Information:

• Delivery Time: 10 to 12 weeks