Product Details:
Automation Grade | Semi-automatic |
Material | Mild Steel |
Strip Cutting Thickness | 50 mm |
Voltage | 220V |
Frequency | 60Hz |
Effective Cutting Width | 6 Metre |
Effective Cutting Length | 12 Metre |
No of Heads | 1 Plasma or 1 Flame Head |
Plasma Cutting | Depends on thickness & selection of plasma source |
Strip Cutting torch | 6 Nos. |
Vertical slide for torch Up/Down | 6 Nos. |
Transverse torch | 1 CNC Flame |
Driving Mode | Dual Drive |
CNC Controller | Start Micro Step. Hypertherm. Kalibum or Equivalent |
Transmission | Rack & Pinion |
AVC for Plasma | 1 No |
THC for Flame — Capacitance Type | 1 No |
Transverse & Longitudinal Drive: AC Servo System | Panasonic / Yaskawe / Fuji or Equivalent |
Speed Control | Stepless Speed control |
Cable and hose management | Cable Drag Chain |
Nesting Software | Hypertherm, Fast CAM or Equivalent |
Product Details:
Automation Grade | Semi-automatic |
Material | Mild Steel |
Phase | Single Phase |
Voltage | AC 220 V |
Frequency | 60 Hz |
Plasma Cutting Speed Range | 2000 mm/min |
Strip Cutting Thickness | 50 mm |
Country of Origin | Made in India |
Technical Details:
No of Heads1 NoPlasma Cutting ThicknessPlasma source, 1 Flame HeadPlasma CuttingDepends on thickness and selection of plasma sourceStrip Cutting Torch2 – 10 NosTransverse torch1 CNC FlameDriving ModeDual DriveCNC ControllerStart Micro Step, Hypertherm or EquivalentTransmissionRack and PinionAVC for Plasma1 NoTHC for Flame- Capacitance Type1 NoTransverse and Longitudinal Drive: AC Servo SystemPanasonic / Yaskawa or EquivalentSpeed ControlStepless Speed controlCable and hose managementCable Drag ChainNesting SoftwareHypertherm, Fast CAM or Equivalent
Product Details:
Automation Grade | Semi Automatic |
Usage/Application | Industrial |
Frequency (Hz) | 60 Hz |
Effective Cuffing width | 1.2 mm |
Flame Cutting Thickness | 75 mm |
Plasma Cutting Speed Range | 3000 mm/min |
Rated Power Supply | 180 W |
Effective Cuffing Length | 3 Metre |
Flame Culling Speed Range | 800 mm/min |
Technical Specification:
No of Heads1 NoPlasma Cutting ThicknessPlasma sourceArc voltage auto torch height control1 NoLCD Dimension7 InchesCross Beam Length1700mmLongitudinal Rail Length3600mmGas PressureMax 0.1MpaOxygenMax1.0MpaPlasma AirOnly pressed AirPlasma Air PressureMax. 0.8MpaNesting SoftwareMTC Turbo nest or Equivalent
Product Details:
Brand | Invent |
Max Cutting Thickness | 75 mm |
Automation Grade | Fully Automatic |
Usage/Application | Industrial |
Frequency | 50 Hz |
Voltage | 220 V |
Max Cutting Length | 12 Metre |
Max Cutting Speed | 6000 mm/min |
Max Cutting Width | 3 Metre |
Country of Origin | Made in India |
Automatic/CNC plasma machine is used to cut with plasma cutter for thin sheet to higher thickness plates like SS, MS & AL etc., CNC cutting machine has 3 axis CNC controlled and can cut profile and straight cutting jobs by using nesting software to do profile cutting. The CNC method provides an advantage over handheld plasma cutting tools due to the cut being programmed and controlled by a computer instead of human motion.
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Fully-automatic |
Power | 1PH |
Voltage | 230V |
Material | Mild Steel |
Machine Capacity | Cutting width 3m X cutting length 12m |
Phase | 1PH |
Country of Origin | Made in India |
CNC Profile Cutting Machine with Flame and Plasma cutting heads.
We can cut profile and straight cutting by this machine which is controlled by CNC, by flame cutting you can cut up 250mm to 300mm thickness and by plasma cutting it depends on selection of plasma source we buy.
These machines are customized like width and length can vary based on customer requirement.
These machines are used for heavy fabrication and automobile industries etc… to increase there production.
Additional Information: